Robotics Sensors and Actuators
117403Module 5: Introduction to motors
Q1(i). Which motor provides high torque at low speed without using a gearbox? (i) DC motor (ii) Stepper motor (iii) AC induction motor (iv) Servo motor20252m
Module 5: Introduction to motors
View this question on its own page →Which motor provides high torque at low speed without using a gearbox?
(i) DC motor
(ii) Stepper motor
(iii) AC induction motor
(iv) Servo motorWorked SolutionExpected answer: (iv) Servo motor in the context of controlled high torque at low speed without a separate gearbox, although this depends on motor design. A direct-drive servo is specifically designed to deliver high torque at low speed; ordinary DC, stepper, and induction motors do not guarantee this without appropriate sizing/gearing.
Q1i. A variable reluctance stepper motor is constructed of material with salient poles: (i) Paramagnetic (ii) Diamagnetic (iii) Ferromagnetic (iv) Non-magnetic20242m
Module 5: Introduction to motors
View this question on its own page →A variable reluctance stepper motor is constructed of material with salient poles:
(i) Paramagnetic
(ii) Diamagnetic
(iii) Ferromagnetic
(iv) Non-magneticWorked SolutionAnswer
Correct Option: (iii) Ferromagnetic
Explanation
Variable Reluctance (VR) stepper: Rotor and stator salient poles made of soft ferromagnetic material (e.g., silicon steel, soft iron) with high permeability.
- Ferromagnetic: Strongly attracted to magnetic field, low reluctance → torque via reluctance variation.
- Paramagnetic: Weakly attracted, insufficient.
- Diamagnetic: Repelled.
- Non-magnetic: No interaction.
Rotor has no windings or magnets; torque produced by tendency to minimize reluctance (align poles).
Final Answer
Ferromagnetic → Option (iii).
Q1j. A stepping motor is a _____ device. (i) Mechanical (ii) Electrical (iii) Analogue (iv) Incremental20242m
Module 5: Introduction to motors
View this question on its own page →A stepping motor is a _____ device.
(i) Mechanical
(ii) Electrical
(iii) Analogue
(iv) IncrementalWorked SolutionAnswer
Correct Option: (iv) Incremental
Explanation
Stepper motor moves in discrete angular steps (e.g., 1.8° per pulse) in response to digital pulses. It is incremental / digital device.
- Each pulse → one step, position = count × step angle.
- Open-loop position control without feedback.
- Also electromechanical (electrical + mechanical), but “incremental” distinguishes it from continuous analog motors.
Final Answer
Incremental (digital) → Option (iv).
Q4(b). Discuss the types of stepper motors along with their advantages and disadvantages.20257m
Module 5: Introduction to motors
View this question on its own page →Discuss the types of stepper motors along with their advantages and disadvantages.
Worked SolutionStepper motor types: (1) Variable-reluctance: toothed soft-iron rotor aligns to minimise magnetic reluctance; no permanent magnet, moderate torque. (2) Permanent-magnet: magnetised rotor interacts with stator fields; good holding torque. (3) Hybrid: combines toothed rotor and permanent magnet, giving finer steps and high torque. Advantages: precise incremental motion, strong holding torque, easy open-loop control, good low-speed performance. Disadvantages: can lose steps if overloaded, resonance/vibration, torque falls at high speed, and continuous holding consumes power and generates heat. Applications include printers, CNC positioning, and small robot axes.
Q6b. Define Servo motor and explain in brief any type of servo motor, also write its application, advantage and disadvantage.20247m
Module 5: Introduction to motors
View this question on its own page →Define Servo motor and explain in brief any type of servo motor, also write its application, advantage and disadvantage.
Worked SolutionAnswer
Definition
Servo motor: Closed-loop actuator with motor + feedback sensor (encoder/pot) + driver that controls position/velocity precisely via error correction .
Types (explain one: DC Servo)
DC Servo: DC motor + encoder + PID controller. Input PWM/analog, encoder feedback, driver H-bridge controls direction/speed. Types: DC, AC, brushless.
Working: Controller compares desired vs actual via encoder → PID → H-bridge → motor rotates → encoder updates until error zero.
Applications
- Robot joints, CNC, robotic arm, gimbal.
- Conveyor, 3D printer.
Advantages
- High precision, fast response, high torque with gear.
- Closed-loop, no step loss (vs stepper).
Disadvantages
- Costly, needs tuning (PID), complexity, requires feedback, hunting.
Final Answer
Servo = motor+feedback closed-loop; DC servo via encoder PID; advantages precision, disadvantages cost and tuning, used in robot joints/CNC.
Q7(a). Explain the working of DC motors and their applications in robotics.20257m
Module 5: Introduction to motors
View this question on its own page →Explain the working of DC motors and their applications in robotics.
Worked SolutionDC motor working: Current through armature conductors in a magnetic field produces force (F = BIL), creating torque. The commutator and brushes reverse armature current each half-turn in a brushed motor to keep torque in the same direction. Back EMF opposes supply voltage and rises with speed. Torque is approximately proportional to armature current; speed depends on voltage and load. Uses: mobile robot drive wheels, small manipulators, grippers, and auxiliary mechanisms. Advantages include easy speed control and high starting torque; limitations include brush wear, electrical noise, and maintenance. Brushless DC motors use electronic commutation.
Q7a. Write and construct in detail of Variable Reluctance (VR) Stepper Motor, application, advantage and disadvantage.20247m
Module 5: Introduction to motors
View this question on its own page →Write and construct in detail of Variable Reluctance (VR) Stepper Motor, application, advantage and disadvantage.
Worked SolutionAnswer
Variable Reluctance (VR) Stepper Motor
Construction: Stator 6 salient poles with windings (3 phases), rotor 4 soft-iron salient poles, no magnets/windings, air gap small. Ferromagnetic.
MermaidDiagramRendering diagram…Working: Energize phase A → stator A poles become electromagnets → rotor minimizes reluctance aligns with A. Sequentially energize B, C → rotor steps 30° (360/(6*4/2)). Step angle .
Advantages: Simple, cheap, no magnets, high speed, no detent.
Disadvantages: Low torque vs PM/hybrid, vibrations, low damping.
Applications: Low-cost positioning, printer carriage, clock.
Final: VR stepper soft-iron rotor steps by reluctance minimization, simple low torque.
Q7b. Write and construct in detail Series motors: Component, application, advantage and disadvantage.20247m
Module 5: Introduction to motors
View this question on its own page →Write and construct in detail Series motors: Component, application, advantage and disadvantage.
Worked SolutionAnswer
Series Motor (DC Series)
Components: Field winding series with armature, commutator, brushes, stator/rotor iron.
Construction: Field coil in series → same current flows through field and armature. Flux , torque .
Working: Supply → series field → armature → torque high at low speed, speed .
Advantages: Very high starting torque, suitable for traction.
Disadvantages: Speed dangerously high at no load, poor speed regulation, sparks.
Applications: Electric train, crane, hoist, starter motor.
Final: Series motor field series with armature , high starting torque for traction.
Q8(a). Explain AC motors along with components, working, advantages, and disadvantages.20257m
Module 5: Introduction to motors
View this question on its own page →Explain AC motors along with components, working, advantages, and disadvantages.
Worked SolutionAC motors: Main parts are stator, rotor, air gap, frame, bearings, and (depending on type) windings/cage or permanent magnets. AC applied to stator windings creates a rotating magnetic field. In an induction motor, this field induces rotor current and torque; rotor runs below synchronous speed. Synchronous speed is Ns = 120f/P rpm, where f is supply frequency and P is pole count. Speed control commonly uses a variable-frequency drive. Advantages: robust, efficient, low maintenance, good for continuous duty. Disadvantages: speed control can require a drive, starting current can be high, and precise position control generally needs feedback/control. Used in robot auxiliaries and industrial motion systems.