A 65 mm diameter solid shaft is to be welded to a flat plate by a fill

Back to the 2026 paper

Module 3: Joints

20267m

A 65 mm diameter solid shaft is to be welded to a flat plate by a fillet weld around the circumference of the shaft. Determine the size of the weld if the torque on the shaft is 3 kN-m. The allowable shear stress in the weld is 70 MPa.

Search Google Ask AI

Similar questions

Design of Machine ElementsA shaft running at 400 rpm transmits 10 kW. Assuming allowable shear stress in the shaft as 40 MPa, find the diameter of the shaft.20267m Design of Machine Elements(a) A solid shaft transmits a torque T. The allowable shear stress is \tau. The diameter of the shaft is (i) \sqrt[3]{\frac{16T}{\pi\tau}} (ii) \sqrt[3]{\frac{32T}{\pi\tau}} (iii) \sqrt[3]{\frac{64T}{\pi\tau}} (iv) \sqrt[3]{\frac{16T}{\tau}}20262m Design of Machine ElementsA plate clutch consists of one pair of contacting surfaces and transmits 20 kW power at 750 rpm. The ratio of outer diameter to inner diameter is 2. The coefficient of friction is 0.2 and the permissible intensity of pressure is 1 N/mm². Assuming uniform wear theory, calculate the inner and outer diameters.20267m Design of Machine ElementsThe transverse fillet welded joints are designed for (i) Tensile strength (ii) Compressive strength (iii) Bending strength (iv) Shear strength20262m

PreviousEstablish the relationship between leg and throat of fillet weld.NextWhy clutches are usually designed on the basis of uniform wear?

AI LearningWeb Platform

Coursify — Personal AI Course Generator

Struggling with a difficult subject or concept? Turn any engineering topic into a structured course with interactive lessons, quizzes, and research-backed explanations.

Try Coursify Free